Jump to content

All Activity

This stream auto-updates     

  1. Yesterday
  2. бесплатный заработок голосов в контакте Бесплатные подарки ЗДЕСЬ>>>>] скачать полную версию взлом вк взлом елочка в контакте в контакте александр бон голос vk gl накрутка голосов срочно взломать вк взломать пароль вк зная логин накрутка голосов vk winder Социальная сеть Вконтакте как и большинство других имеет собственную внутреннюю валюту при помощи которой совершаются операции. После того, как вы подобрали подходящую картинку, кликните по ней левой клавишей мыши, чтобы открыть специальное окно отправки подарка. В игре вас ждут бесконечные вторжения со стороны других игроков и волн тварей. По его словам, он имеет доступ еще к 71 млн профилей, но решил пока не продавать эти данные. Материальная ответственность работодателя перед работником. взлом копатель онлайн вконтакте бесплатная программа для взлома вк взлом вконтакте без регистрации vk взлом скачать бесплатно быстрая накрутка голосов вконтакте скачать friends голосов вконтакте программа взлома голосов в контакте бесплатные голоса вк скачать программу взлом инди кот вк взломать в контакте чужую страничку как взломать лигу скорости вконтакте как взломать переписку в контакте фото голоса вк бесплатные подарки вк скачать бесплатно Участие в конкурсах: администраторы групп часто проводят викторины на страницах, в которых участникам нужно как можно быстрее ответить на вопросы, угадать картинку и тому подобное. Скачать программу для взлома стритрейсеры на деньги бесплатно. Чем больше времени отнимает задание, тем больше голосов. Скачать архив с программой бот для игры елочка 2015 вконтакте можно по ссылке в конце поста. Они не только разнообразят общение с вашими друзьями, но и помогут в установке приложений и игр. Иначе окажется, что вы что-то не сделали, и все придется проходить заново. Это позволит избежать спама и бана личной страницы. накрутить голоса в вк бесплатно сайти для заробітку голосів вконтакте как взломать страничку вк Подробнее тут Снижены цены на живых вступивших в контакте - 590р за 1000! Просто скачивай читы и коды к мир вестерна вконтакте и будь. Многие новые приложения и группы в частности, проводят различные акции, типа: приведи 20 друзей и получишь 1 голос и т. Для этого получится использовать, как личную страницу, так и создавать рекламные группы. К счастью, не все люди так безумны как кажутся, а популярный аккаунт может принести немалые деньги (или иного рода дивиденды) своему владельцу. Перед тем, как начать зарабатывать голоса пройдите не сложною регистрацию. Вполне возможно что такие друзья у вас есть. Для основных элементов сайта используется только два цвета: синий и белый. На полученные деньги сможете купить голоса. В инструменты программы вошли боты для популярных сервисов накрутки вк. Мошенники создадут письмо, похожее на стандартную рассылку администрации. Жаль, но усердная борьба администрации Вконтакте с сервисами по заработку голосов привела к их закрытию. почему взламывают контакт как взломать vk на голоса игра на голоса в вконтакте как взломать вк через скрипт скачать бесплатно вк взлом игра голос припяти в контакте взломать контакт онлайн Специальные приложения Вконтакте являются официальным методом получения голосов Вк бесплатно. программа получить голоса в контакте скачать взлом вормикс вк как взломать строничку в вконтакте как легко взломать контакт видео бесплатные подарки и голоса вконтакте вк взлом станицы удалить отправленные подарки в контакте Для тех, кто еще сомневается в том, что это реально предоставим скрин вывода голосов. Будьте уверены, что те, кто хочет начать зарабатывать хотя бы сто рублей в день сидя дома у любимого монитора, те, действительно находят способы как заработать голоса в контакте бесплатно, выручить кругленькую сумму, пополнить баланс и многое другое. В социальной сети используется контекстная реклама, которая появляется слева и в новостях. У совершеннолетнего пользователя, у которого много друзей, а в личной информации указан крупный город, заданий будет больше, чем у пятнадцатилетнего жителя глубинки. Среди простых заданий: вступить в группу, оставить комментарий и прочие (они оцениваются в 1-3 голоса). Это Скачать чит для игры в бильярд в одноклассниках Скачать бесплатно читы для игры бильярд в одноклассниках. В-третьих, это обычное человеческое желание развивать личную группу или страницу. Смотреть еще похожие новости: как накачать голоса в вк подарки в контакте анонимно простой способ взломать страницу вконтакте як заробити голоса вконтакте бесплатно Комментарии и отзывы на фильм: При каждом попадании из червя хлещет кровь. О том как заработать голоса в вк, а также про виды заработка в Вконтатке и пойдет речь дальше в нашей статье. Тогда не до того было, все ж поздравляют кругом. Для того чтобы найти такие сообщества можно попробовать воспользоваться поиском.
  3. How to install the ethernet library in Energia for CC3200 LaunchXL Board? I have downloaded the library from energia github but it does not seem to work and gives error "#include "Udp.h" no such file and write is not part of this file as well as multiple libraries for Ethernet. Could someone help me out with the proper installation of Ethernet Library? Thanks in Advance
  4. Last week
  5. I am using two CC3200 LaunchXL Boards, one of them is configured as Server as well as an Access point( Naming the board as B1). The other board will connect to the Access point and then connect to the server as Client (Naming the board as B2). B2 is able to connect to the Wi-Fi AP hosted by B1, but cannot connect to the server. I tried using python socket code by connecting to B1 as well as putty, but the server is not responding. Could someone point me out how to resolve it? Thanks in Advance
  6. By providing that kind of information nobody will be able to help. So at least add: - type of SD card - connection of sd card - observed error - steps you have tried already - references to the libraries used
  7. minet

    msp430fr5994

    am actually using an example code to write on SD card. on my MSP430FR5994 and its not working. can t someone please help me. the code looks like: #include "SPI.h" #include "pfatfs.h" #define read_buffer 400 // size (in bytes) of read buffer #define LOG_DELAY 3600 #define detect_pin 25 // sd_detect pin (P7.2) (P7.2/UCB2CLK ) #define cs_pin 31 // chip select pin (P4.0) (P4.0/A8) unsigned short int bw, br ,c ; //char buffer[1]; char buffer[read_buffer]; int result; DIR dir; FILINFO fno; // file information int count = 0; void setup () { pinMode(cs_pin, OUTPUT); pinMode(detect_pin, INPUT_PULLUP); Serial.begin (9600); // initialisation FatFs.begin(cs_pin); // initialisation PFatFs lib Serial.println (); Serial.println ("welcome to SD logging"); Serial.println (""); result = FatFs.opendir (&dir, ""); if (result) { Serial.println("I cannot find the SD card. Please check the connections."); // sd nicht gefunden return; } Serial.println(" SD inhalt: "); count = 0; for (;;) { result = FatFs.readdir(&dir, &fno); // if (result || !fno.fname[0]) break; // if (fno.fattrib & AM_DIR) { // Serial.print("<dir>\t"); Serial.println(fno.fname); // } else { Serial.print(fno.fsize); // file size Serial.print("\t"); //tabulation Serial.println(fno.fname); // file name if (!strcmp (fno.fname, "demo.txt")){ count = 1; } } } if (result) { Serial.println("Error of card contents."); return; } Serial.println(""); if (count){ Serial.println("demo.TXT file is present on the card"); } else{ Serial.println("demo.TXT file is present not on the card."); return; } Serial.println(); for (;;) { result = FatFs.read(buffer, sizeof(buffer), &br); /* Read a chunk of file */ if (result || !br) break; /* Error or end of file */ for (uint16_t i = 0; i < br; i++) /* Type the data */ Serial.print(buffer); } delay(LOG_DELAY); Serial.println(); result = FatFs.open("demo.TXT"); if (result) { Serial.println("Unable to open file"); return; } Serial.println(); Serial.println("file is being edited."); bw=1; result = FatFs.write(buffer, sizeof(buffer), &bw); if (result) { Serial.println("Error while writing ..."); return; } result = FatFs.write(0, 0, &bw); //writting (?) if (result) { Serial.println("Error while writing file.."); pf_write(&c, 1, &bw); return ; /* (bw == 1) ? 1 : EOF; */ } result = FatFs.close(); // close file if (result) { Serial.println("Error closing file."); return; } }
  8. Yay, that did it! Changed tools.dslite.path version to 9.3.0.1863 in platform.txt in $HOME/.energia15/packages/energia/hardware/msp430/1.0.6/platform.txt and then also installed the TIVAC package which installed the 9.3.0.1863 version of DSLite. At first I tried pulling the "-e1" off the config value for the 9.2.0 version, which got it to find DSLite, but then ran into another issue where it wasn't finding MSP-EXP430FR2476LP.ccxml
  9. see the same now - i do not know why the downgrade did not properly set the path for the downloader Just can suggest a direct hack now: Got to your Energia install folder and edit .... \hardware\energia\msp430\platform.txt replace: tools.dslite.path={runtime.tools.dslite-9.2.0.1793-e1.path} with: tools.dslite.path={runtime.tools.dslite-9.3.0.1863.path} If it can not find the dslilte again then also install the TIVAC package from the board manager - that is also using this dslite version
  10. Thanks - that lets me verify/compile, but when trying to upload, I get this error (tested on both Windows 10 and Ubuntu 20.04): java.io.IOException: Cannot run program "{runtime.tools.dslite-9.2.0.1793-e1.path}/DebugServer/bin/DSLite": error=2, No such file or directory at java.lang.ProcessBuilder.start(ProcessBuilder.java:1048) at java.lang.Runtime.exec(Runtime.java:620) at java.lang.Runtime.exec(Runtime.java:485) at processing.app.helpers.ProcessUtils.exec(ProcessUtils.java:11) at cc.arduino.packages.Uploader.executeUploadCommand(Uploader.java:129) at cc.arduino.packages.uploaders.SerialUploader.runCommand(SerialUploader.java:383) at cc.arduino.packages.uploaders.SerialUploader.uploadUsingPreferences(SerialUploader.java:197) at cc.arduino.UploaderUtils.upload(UploaderUtils.java:77) at processing.app.SketchController.upload(SketchController.java:732) at processing.app.SketchController.exportApplet(SketchController.java:703) at processing.app.Editor$UploadHandler.run(Editor.java:2075) at java.lang.Thread.run(Thread.java:748) Caused by: java.io.IOException: error=2, No such file or directory at java.lang.UNIXProcess.forkAndExec(Native Method) at java.lang.UNIXProcess.<init>(UNIXProcess.java:247) at java.lang.ProcessImpl.start(ProcessImpl.java:134) at java.lang.ProcessBuilder.start(ProcessBuilder.java:1029) ... 11 more An error occurred while uploading the sketch
  11. Hi, it looks like that during the packaging of the last release a few files got missing. If you open the Board manager and switch the version for the MSP430 back to 1.0.6 it should work again.
  12. @ILAMtitanI am trying your code on some LaunchPads, it works perfectly on MSP430G2 LaunchPad, but on MSP439F5529LP it seems that the result is a bit off. I tried on two F5529 LaunchPads that I got, both showed the same results, the LEDs had the right color but the brightness was very dark in spite of any parameters. And eventually I found out that the reason seems to be the timing in the assemly code for 25MHz(ws2811_hs_25.S), the measured time are as below: High / Low us High / Low us @ MHz (expected) (actual) Zero: 0.25 / 1.00 0.24 / 0.89 One: 0.60 / 0.65 0.52 / 0.61 I tried to fix it with adding more nops in the code(please forgive my poor assemly coding...), and it seems to be fixed, at least on my LaunchPads. I am posing this just in case someone has the similar problem, and also to give my thanks to ILAMtitan and the great guys to create this library in the first place. Please find the code for adjusted timing as below: https://github.com/Shuyang-z/WS2811Driver
  13. Earlier
  14. Hello, I just registered an this is my first post. I am trying to get Energia working with my Dev Station. I am working with Windows 10, Launchpad MSP430G2 with an MSP430G2231 controller. I installed Energia on 4 computers. It only worked on one which has Windows 10 64 bits. After some research, I found that there seems to be a problem with 32 bit Windows. Has this been resolved? Is there a workaround? Thank you! Saga
  15. yes, void delayMicroseconds(unsigned int us) 🙂
  16. Hi there! I have a TI LaunchPad LP-MSP430FR2476 and have Energia 1.8.11E23 on Windows. Just trying to get a simple blink sketch to compile and run, but get the error in msp430h:1793: "Failed to match a default include file" when just compiling. I have the MSP-EXP430FR2476LP Board selected. Selecting other boards lets me compile OK, so I suspect it's an issue with the board definition somehow. Any ideas?
  17. I have been running into a problem recently with uploading to my board. Note, I am fairly new to this area of tech so I may be doing something wrong. I am currently doing an assignment for one of my classes that requires me to upload to my board and i keep getting the error message: Energia: 1.8.11E23 (Windows 10), Board: "MSP-EXP430FR2433LP" Sketch uses 274 bytes (1%) of program storage space. Maximum is 15360 bytes. Global variables use 2 bytes (0%) of dynamic memory, leaving 4094 bytes for local variables. Maximum is 4096 bytes. DSLite version 9.3.0.1863 Configuring Debugger (may take a few minutes on first launch)... Initializing Register Database... Initializing: MSP430 error: MSP430: Error initializing emulator: No USB FET was found Failed: MSP430: Error initializing emulator: No USB FET was found the selected serial port does not exist or your board is not connected I have tried re-downloading and googling the problem but nothing seems to work. I have 2 serial ports available, COM4 and COM5, but those have not worked at all either.
  18. Заказали тут препарат и остались довольны Lucivenet отзывы
  19. Hello everyone, I am just a beginner in using MSP430, I want to know how to design a circuit of motion detection system. I have the ports which LCD display should be connected to , So I want to check if they are correct, since all of this is new to me. for LCD display port connection. connect RS to P2.5 connect RW to P2.6 connect E to P2.4 connect D0-D3 to NC connect D4 to P2.0 connect D5 to P2.1 connect D6 to P2.2 connect D7 to P2.3 are the above correct? where should I connect PIR sensor? please, I need help and sorry for my bad English.
  20. Hi. I seem to get the following error whenever I try using "GPIOPinConfigure()" as shown below: However I do NOT get the error whenever the function "GPIOPinConfigure()" is NOT used: In essence, I want to be able to make a SSI connection with two TM4C123GH6PM launchpads in order to send temperature information (from one end) and print it onto a Kentec LCD screen (at the other end). The complete code of the sender is posted in the following: #include <LiquidCrystal.h> #include <DHT.h> #include <stdint.h> #include <stdbool.h> #include "inc/hw_memmap.h" #include "inc/hw_types.h" #include "driverlib/gpio.h" #include "driverlib/pin_map.h" #include "driverlib/sysctl.h" #include "driverlib/uart.h" #include "inc/hw_ints.h" #include "driverlib/interrupt.h" #define DHTPIN PF_0 // GPIO pin for data #define DHTTYPE DHT22 //Type of sensor (DHT11 or DHT22) DHT dht(DHTPIN, DHTTYPE); //LCD Print LiquidCrystal lcd(PD_1, PD_2, PD_3, PE_1, PE_2, PE_3); void setup() { // put your setup code here, to run once: Serial.begin(115200); //Serial Baud rate Serial.println("DHT22 test!"); dht.begin(); lcd.begin(16, 2); lcd.print("TEST"); delay(2000); lcd.clear(); } /*void UARTIntHandler(void) { uint32_t ui32Status; ui32Status = UARTIntStatus(UART0_BASE, true); //get interrupt status UARTIntClear(UART0_BASE, ui32Status); //clear the asserted interrupts while(UARTCharsAvail(UART0_BASE)) //loop while there are chars { UARTCharPutNonBlocking(UART0_BASE, UARTCharGetNonBlocking(UART0_BASE)); //echo character GPIOPinWrite(GPIO_PORTF_BASE, GPIO_PIN_2, GPIO_PIN_2); //blink LED SysCtlDelay(SysCtlClockGet() / (1000 * 3)); //delay ~1 msec GPIOPinWrite(GPIO_PORTF_BASE, GPIO_PIN_2, 0); //turn off LED } }*/ void loop() { //put your main code here, to run repeatedly: SysCtlClockSet(SYSCTL_SYSDIV_4 | SYSCTL_USE_PLL | SYSCTL_OSC_MAIN | SYSCTL_XTAL_16MHZ); SysCtlPeripheralEnable(SYSCTL_PERIPH_UART0); SysCtlPeripheralEnable(SYSCTL_PERIPH_GPIOA); //GPIOPinConfigure(GPIO_PA0_U0RX); /*GPIOPinConfigure(GPIO_PA0_U0RX); GPIOPinConfigure(GPIO_PA1_U0TX); GPIOPinTypeUART(GPIO_PORTA_BASE, GPIO_PIN_0 | GPIO_PIN_1); SysCtlPeripheralEnable(SYSCTL_PERIPH_GPIOF); GPIOPinTypeGPIOOutput(GPIO_PORTF_BASE, GPIO_PIN_2); UARTConfigSetExpClk(UART0_BASE, SysCtlClockGet(), 115200, (UART_CONFIG_WLEN_8 | UART_CONFIG_STOP_ONE | UART_CONFIG_PAR_NONE)); IntMasterEnable(); IntEnable(INT_UART0); UARTIntEnable(UART0_BASE, UART_INT_RX | UART_INT_RT);*/ lcd.noDisplay(); delay(200); lcd.display(); delay(200); delay(2000); float h = dht.readHumidity(); float t = dht.readTemperature(); float f = dht.readTemperature(true); if (isnan(h) || isnan(t) || isnan(f)) { Serial.println("Failed to read from DHT sensor!"); return; } // Prints results on serial monitor Serial.print("Humidity: "); Serial.print(h); Serial.print(" %\t"); Serial.print("Temperature: "); Serial.print(t); Serial.print(" *C"); Serial.print(", "); Serial.print(f); Serial.println(" *F "); // Prints on LCD lcd.setCursor(0, 1); lcd.print("HUMID% = "); lcd.print(h); lcd.println(" %" ); lcd.setCursor(1, 0); lcd.print(" TEMP = "); lcd.print(t); lcd.println("*C"); } I hope someone can help me address this error. Thank you.
  21. Hello everyone, i was exporting a library from arduino when i realized i needed a sleepMicroseconds alternative for delayMicroseconds. is there one? Thank you.
  22. You need to use the tool Uniflash. https://www.ti.com/tool/UNIFLASH There is a rather sophisticated set of features. Here is the User's Guide. http://www.ti.com/lit/ug/swru469g/swru469g.pdf
  23. Hi. I seem to get the following error whenever I try using "GPIOPinConfigure()" as shown below: However I do NOT get the error whenever the function "GPIOPinConfigure()" is NOT used: In essence, I want to be able to make a SSI connection with two TM4C123GH6PM launchpads in order to send temperature information (from one end) and print it onto a Kentec LCD screen (at the other end). The complete code of the sender is posted in the following: #include <LiquidCrystal.h> #include <DHT.h> #include <stdint.h> #include <stdbool.h> #include "inc/hw_memmap.h" #include "inc/hw_types.h" #include "driverlib/gpio.h" #include "driverlib/pin_map.h" #include "driverlib/sysctl.h" #include "driverlib/uart.h" #include "inc/hw_ints.h" #include "driverlib/interrupt.h" #define DHTPIN PF_0 // GPIO pin for data #define DHTTYPE DHT22 //Type of sensor (DHT11 or DHT22) DHT dht(DHTPIN, DHTTYPE); //LCD Print LiquidCrystal lcd(PD_1, PD_2, PD_3, PE_1, PE_2, PE_3); void setup() { // put your setup code here, to run once: Serial.begin(115200); //Serial Baud rate Serial.println("DHT22 test!"); dht.begin(); lcd.begin(16, 2); lcd.print("TEST"); delay(2000); lcd.clear(); } /*void UARTIntHandler(void) { uint32_t ui32Status; ui32Status = UARTIntStatus(UART0_BASE, true); //get interrupt status UARTIntClear(UART0_BASE, ui32Status); //clear the asserted interrupts while(UARTCharsAvail(UART0_BASE)) //loop while there are chars { UARTCharPutNonBlocking(UART0_BASE, UARTCharGetNonBlocking(UART0_BASE)); //echo character GPIOPinWrite(GPIO_PORTF_BASE, GPIO_PIN_2, GPIO_PIN_2); //blink LED SysCtlDelay(SysCtlClockGet() / (1000 * 3)); //delay ~1 msec GPIOPinWrite(GPIO_PORTF_BASE, GPIO_PIN_2, 0); //turn off LED } }*/ void loop() { //put your main code here, to run repeatedly: SysCtlClockSet(SYSCTL_SYSDIV_4 | SYSCTL_USE_PLL | SYSCTL_OSC_MAIN | SYSCTL_XTAL_16MHZ); SysCtlPeripheralEnable(SYSCTL_PERIPH_UART0); SysCtlPeripheralEnable(SYSCTL_PERIPH_GPIOA); //GPIOPinConfigure(GPIO_PA0_U0RX); /*GPIOPinConfigure(GPIO_PA0_U0RX); GPIOPinConfigure(GPIO_PA1_U0TX); GPIOPinTypeUART(GPIO_PORTA_BASE, GPIO_PIN_0 | GPIO_PIN_1); SysCtlPeripheralEnable(SYSCTL_PERIPH_GPIOF); GPIOPinTypeGPIOOutput(GPIO_PORTF_BASE, GPIO_PIN_2); UARTConfigSetExpClk(UART0_BASE, SysCtlClockGet(), 115200, (UART_CONFIG_WLEN_8 | UART_CONFIG_STOP_ONE | UART_CONFIG_PAR_NONE)); IntMasterEnable(); IntEnable(INT_UART0); UARTIntEnable(UART0_BASE, UART_INT_RX | UART_INT_RT);*/ lcd.noDisplay(); delay(200); lcd.display(); delay(200); delay(2000); float h = dht.readHumidity(); float t = dht.readTemperature(); float f = dht.readTemperature(true); if (isnan(h) || isnan(t) || isnan(f)) { Serial.println("Failed to read from DHT sensor!"); return; } // Prints results on serial monitor Serial.print("Humidity: "); Serial.print(h); Serial.print(" %\t"); Serial.print("Temperature: "); Serial.print(t); Serial.print(" *C"); Serial.print(", "); Serial.print(f); Serial.println(" *F "); // Prints on LCD lcd.setCursor(0, 1); lcd.print("HUMID% = "); lcd.print(h); lcd.println(" %" ); lcd.setCursor(1, 0); lcd.print(" TEMP = "); lcd.print(t); lcd.println("*C"); } I hope someone can help me address this error. Thank you.
  24. Hi I Have tried to understand and implement the instructions by Michael in this link to program Energia code into Flash of CC3220SF Launchpad. Solution from Michael However, I do not have strong background in Bootloader or Uniflash and need some help to implement Michael's proposal. Anyone has some step-by-step instructions for programming of flash with an Energia code? Michael has some references to bootloader, /sys/ folder, *.bin file, etc. Which tool is Michael using? Uniflash? Where is the /sys/ folder he is refering to? I really appreciate your help. Thanks, Sam
  25. There is already a ticket Workshop — CC3220 — Add Upload to Flash, unfortunately still open.
  26. Hi, I am not familiar with CCS and a novice in TI Launchpads. I have written an Energia code and would like to burn it into CC3220SF launchpad Flash memory so I could execute the code while disconnected from PC USB. I looked at e2e.ti.com/.../2495478, but did not work for me. Could you please guide me achieve this? Thanks, Sam
  27. I am looking to buy one of these educational boosterpacks: https://www.tindie.com/products/robg/18-color-lcd-educational-boosterpack-20-pcs/ They seem to be out of stock and I would only like to purchase one. Thanks.
  28. Hello, I just downloaded energia and get this error when it gets compiled below is the code and output i get any input is appreciated thanks. void setup() { // put your setup code here, to run once: } void loop() { // put your main code here, to run repeatedly: } C:\energia-1.8.10E23\arduino-builder -dump-prefs -logger=machine -hardware C:\energia-1.8.10E23\hardware -hardware C:\Users\user1\AppData\Local\Energia15\packages -tools C:\energia-1.8.10E23\tools-builder -tools C:\energia-1.8.10E23\hardware\tools\msp430 -tools C:\Users\user1\AppData\Local\Energia15\packages -built-in-libraries C:\energia-1.8.10E23\libraries -libraries C:\Users\user1\Documents\Energia\libraries -fqbn=energia:msp432e:MSP-EXP432E401Y -vid-pid=0451_BEF3 -ide-version=10811 -build-path C:\Users\user1\AppData\Local\Temp\arduino_build_575049 -warnings=all -build-cache C:\Users\user1\AppData\Local\Temp\arduino_cache_983109 -prefs=build.warn_data_percentage=75 -prefs=runtime.tools.dslite.path=C:\Users\user1\AppData\Local\Energia15\packages\energia\tools\dslite\8.0.0.1202 -prefs=runtime.tools.dslite-8.0.0.1202.path=C:\Users\user1\AppData\Local\Energia15\packages\energia\tools\dslite\8.0.0.1202 -prefs=runtime.tools.arm-none-eabi-gcc.path=C:\Users\user1\AppData\Local\Energia15\packages\energia\tools\arm-none-eabi-gcc\6.3.1-20170620 -prefs=runtime.tools.arm-none-eabi-gcc-6.3.1-20170620.path=C:\Users\user1\AppData\Local\Energia15\packages\energia\tools\arm-none-eabi-gcc\6.3.1-20170620 -prefs=runtime.tools.ino2cpp.path=C:\Users\user1\AppData\Local\Energia15\packages\energia\tools\ino2cpp\1.0.3 -prefs=runtime.tools.ino2cpp-1.0.3.path=C:\Users\user1\AppData\Local\Energia15\packages\energia\tools\ino2cpp\1.0.3 -verbose C:\Users\user1\Documents\Energia\sketch_may09a\sketch_may09a.ino C:\energia-1.8.10E23\arduino-builder -compile -logger=machine -hardware C:\energia-1.8.10E23\hardware -hardware C:\Users\user1\AppData\Local\Energia15\packages -tools C:\energia-1.8.10E23\tools-builder -tools C:\energia-1.8.10E23\hardware\tools\msp430 -tools C:\Users\user1\AppData\Local\Energia15\packages -built-in-libraries C:\energia-1.8.10E23\libraries -libraries C:\Users\user1\Documents\Energia\libraries -fqbn=energia:msp432e:MSP-EXP432E401Y -vid-pid=0451_BEF3 -ide-version=10811 -build-path C:\Users\user1\AppData\Local\Temp\arduino_build_575049 -warnings=all -build-cache C:\Users\user1\AppData\Local\Temp\arduino_cache_983109 -prefs=build.warn_data_percentage=75 -prefs=runtime.tools.dslite.path=C:\Users\user1\AppData\Local\Energia15\packages\energia\tools\dslite\8.0.0.1202 -prefs=runtime.tools.dslite-8.0.0.1202.path=C:\Users\user1\AppData\Local\Energia15\packages\energia\tools\dslite\8.0.0.1202 -prefs=runtime.tools.arm-none-eabi-gcc.path=C:\Users\user1\AppData\Local\Energia15\packages\energia\tools\arm-none-eabi-gcc\6.3.1-20170620 -prefs=runtime.tools.arm-none-eabi-gcc-6.3.1-20170620.path=C:\Users\user1\AppData\Local\Energia15\packages\energia\tools\arm-none-eabi-gcc\6.3.1-20170620 -prefs=runtime.tools.ino2cpp.path=C:\Users\user1\AppData\Local\Energia15\packages\energia\tools\ino2cpp\1.0.3 -prefs=runtime.tools.ino2cpp-1.0.3.path=C:\Users\user1\AppData\Local\Energia15\packages\energia\tools\ino2cpp\1.0.3 -verbose C:\Users\user1\Documents\Energia\sketch_may09a\sketch_may09a.ino Using board 'MSP-EXP432E401Y' from platform in folder: C:\Users\user1\AppData\Local\Energia15\packages\energia\hardware\msp432e\5.19.0 Using core 'msp432e' from platform in folder: C:\Users\user1\AppData\Local\Energia15\packages\energia\hardware\msp432e\5.19.0 Detecting libraries used... "C:\\Users\\user1\\AppData\\Local\\Energia15\\packages\\energia\\tools\\arm-none-eabi-gcc\\6.3.1-20170620/bin/arm-none-eabi-g++" -mcpu=cortex-m4 -mthumb -mfloat-abi=hard -mfpu=fpv4-sp-d16 -mabi=aapcs -g -Dxdc_target_types__=gnu/targets/arm/std.h -Dxdc_target_name__=M4F "-Dxdc_cfg__xheader__=\"configPkg/package/cfg/energia_pm4fg.h\"" -DBOARD_MSP_EXP432E401Y -Dxdc__nolocalstring=1 -D__MSP432E401Y__ -c -g -O0 -w -ffunction-sections -fdata-sections -fno-threadsafe-statics -fno-rtti -fno-exceptions -std=c++98 -w -x c++ -E -CC -mcpu=cortex-m4 -mthumb -DF_CPU=120000000L -DARDUINO=10811 -DENERGIA=10811 -DENERGIA_MSP_EXP432E401Y -DENERGIA_ARCH_MSP432E "-IC:\\Users\\user1\\AppData\\Local\\Energia15\\packages\\energia\\hardware\\msp432e\\5.19.0\\system/source/ti/devices/msp432e4/driverlib" "-IC:\\Users\\user1\\AppData\\Local\\Energia15\\packages\\energia\\hardware\\msp432e\\5.19.0\\system/source/ti/devices/msp432e4/inc" "-IC:\\Users\\user1\\AppData\\Local\\Energia15\\packages\\energia\\hardware\\msp432e\\5.19.0\\system/source/ti/devices/msp432e4/" "-IC:\\Users\\user1\\AppData\\Local\\Energia15\\packages\\energia\\hardware\\msp432e\\5.19.0\\system/source/third_party/CMSIS/Include" "-IC:\\Users\\user1\\AppData\\Local\\Energia15\\packages\\energia\\hardware\\msp432e\\5.19.0\\system/energia" "-IC:\\Users\\user1\\AppData\\Local\\Energia15\\packages\\energia\\hardware\\msp432e\\5.19.0\\cores\\msp432e/ti/runtime/wiring/" "-IC:\\Users\\user1\\AppData\\Local\\Energia15\\packages\\energia\\hardware\\msp432e\\5.19.0\\cores\\msp432e/ti/runtime/wiring/msp432e" "-IC:\\Users\\user1\\AppData\\Local\\Energia15\\packages\\energia\\hardware\\msp432e\\5.19.0\\system/source/ti/net/bsd" "-IC:\\Users\\user1\\AppData\\Local\\Energia15\\packages\\energia\\hardware\\msp432e\\5.19.0\\system/source" "-IC:\\Users\\user1\\AppData\\Local\\Energia15\\packages\\energia\\hardware\\msp432e\\5.19.0\\system/source/third_party/CMSIS/Include" "-IC:\\Users\\user1\\AppData\\Local\\Energia15\\packages\\energia\\hardware\\msp432e\\5.19.0\\system/source/ti/posix/gcc" "-IC:\\Users\\user1\\AppData\\Local\\Energia15\\packages\\energia\\hardware\\msp432e\\5.19.0\\system/kernel/tirtos/packages/gnu/targets/arm/libs/install-native/arm-none-eabi/include/newlib-nano" "-IC:\\Users\\user1\\AppData\\Local\\Energia15\\packages\\energia\\hardware\\msp432e\\5.19.0\\system/kernel/tirtos/packages/gnu/targets/arm/libs/install-native/arm-none-eabi/include" "-IC:\\Users\\user1\\AppData\\Local\\Energia15\\packages\\energia\\hardware\\msp432e\\5.19.0\\system/source" "-IC:\\Users\\user1\\AppData\\Local\\Energia15\\packages\\energia\\hardware\\msp432e\\5.19.0\\system/kernel/tirtos/packages" "-IC:\\Users\\user1\\AppData\\Local\\Energia15\\packages\\energia\\hardware\\msp432e\\5.19.0\\system/kernel/tirtos/builds/MSP_EXP432E401Y/release/gcc/.." "-IC:\\Users\\user1\\AppData\\Local\\Energia15\\packages\\energia\\hardware\\msp432e\\5.19.0\\system/kernel/tirtos/packages/gnu/targets/arm/libs/install-native/arm-none-eabi/include/newlib-nano" "-IC:\\Users\\user1\\AppData\\Local\\Energia15\\packages\\energia\\hardware\\msp432e\\5.19.0\\system/kernel/tirtos/packages/gnu/targets/arm/libs/install-native/arm-none-eabi/include" "-IC:\\Users\\user1\\AppData\\Local\\Energia15\\packages\\energia\\tools\\arm-none-eabi-gcc\\6.3.1-20170620/bin//arm-none-eabi/include" "-IC:\\Users\\user1\\AppData\\Local\\Energia15\\packages\\energia\\hardware\\msp432e\\5.19.0\\system/source/ti/devices/msp432e4/driverlib" "-IC:\\Users\\user1\\AppData\\Local\\Energia15\\packages\\energia\\hardware\\msp432e\\5.19.0\\system/source/ti/devices/msp432e4/inc" "-IC:\\Users\\user1\\AppData\\Local\\Energia15\\packages\\energia\\hardware\\msp432e\\5.19.0\\system/source/ti/devices/msp432e4/" "-IC:\\Users\\user1\\AppData\\Local\\Energia15\\packages\\energia\\hardware\\msp432e\\5.19.0\\system/source/third_party/CMSIS/Include" "-IC:\\Users\\user1\\AppData\\Local\\Energia15\\packages\\energia\\hardware\\msp432e\\5.19.0\\cores\\msp432e" "-IC:\\Users\\user1\\AppData\\Local\\Energia15\\packages\\energia\\hardware\\msp432e\\5.19.0\\variants\\MSP_EXP432E401Y" "C:\\Users\\user1\\AppData\\Local\\Temp\\arduino_build_575049\\sketch\\sketch_may09a.ino.cpp" -o nul "C:\\Users\\user1\\AppData\\Local\\Energia15\\packages\\energia\\tools\\arm-none-eabi-gcc\\6.3.1-20170620/bin/arm-none-eabi-g++" -mcpu=cortex-m4 -mthumb -mfloat-abi=hard -mfpu=fpv4-sp-d16 -mabi=aapcs -g -Dxdc_target_types__=gnu/targets/arm/std.h -Dxdc_target_name__=M4F "-Dxdc_cfg__xheader__=\"configPkg/package/cfg/energia_pm4fg.h\"" -DBOARD_MSP_EXP432E401Y -Dxdc__nolocalstring=1 -D__MSP432E401Y__ -c -g -O0 -w -ffunction-sections -fdata-sections -fno-threadsafe-statics -fno-rtti -fno-exceptions -std=c++98 -w -x c++ -E -CC -mcpu=cortex-m4 -mthumb -DF_CPU=120000000L -DARDUINO=10811 -DENERGIA=10811 -DENERGIA_MSP_EXP432E401Y -DENERGIA_ARCH_MSP432E "-IC:\\Users\\user1\\AppData\\Local\\Energia15\\packages\\energia\\hardware\\msp432e\\5.19.0\\system/source/ti/devices/msp432e4/driverlib" "-IC:\\Users\\user1\\AppData\\Local\\Energia15\\packages\\energia\\hardware\\msp432e\\5.19.0\\system/source/ti/devices/msp432e4/inc" "-IC:\\Users\\user1\\AppData\\Local\\Energia15\\packages\\energia\\hardware\\msp432e\\5.19.0\\system/source/ti/devices/msp432e4/" "-IC:\\Users\\user1\\AppData\\Local\\Energia15\\packages\\energia\\hardware\\msp432e\\5.19.0\\system/source/third_party/CMSIS/Include" "-IC:\\Users\\user1\\AppData\\Local\\Energia15\\packages\\energia\\hardware\\msp432e\\5.19.0\\system/energia" "-IC:\\Users\\user1\\AppData\\Local\\Energia15\\packages\\energia\\hardware\\msp432e\\5.19.0\\cores\\msp432e/ti/runtime/wiring/" "-IC:\\Users\\user1\\AppData\\Local\\Energia15\\packages\\energia\\hardware\\msp432e\\5.19.0\\cores\\msp432e/ti/runtime/wiring/msp432e" "-IC:\\Users\\user1\\AppData\\Local\\Energia15\\packages\\energia\\hardware\\msp432e\\5.19.0\\system/source/ti/net/bsd" "-IC:\\Users\\user1\\AppData\\Local\\Energia15\\packages\\energia\\hardware\\msp432e\\5.19.0\\system/source" "-IC:\\Users\\user1\\AppData\\Local\\Energia15\\packages\\energia\\hardware\\msp432e\\5.19.0\\system/source/third_party/CMSIS/Include" "-IC:\\Users\\user1\\AppData\\Local\\Energia15\\packages\\energia\\hardware\\msp432e\\5.19.0\\system/source/ti/posix/gcc" "-IC:\\Users\\user1\\AppData\\Local\\Energia15\\packages\\energia\\hardware\\msp432e\\5.19.0\\system/kernel/tirtos/packages/gnu/targets/arm/libs/install-native/arm-none-eabi/include/newlib-nano" "-IC:\\Users\\user1\\AppData\\Local\\Energia15\\packages\\energia\\hardware\\msp432e\\5.19.0\\system/kernel/tirtos/packages/gnu/targets/arm/libs/install-native/arm-none-eabi/include" "-IC:\\Users\\user1\\AppData\\Local\\Energia15\\packages\\energia\\hardware\\msp432e\\5.19.0\\system/source" "-IC:\\Users\\user1\\AppData\\Local\\Energia15\\packages\\energia\\hardware\\msp432e\\5.19.0\\system/kernel/tirtos/packages" "-IC:\\Users\\user1\\AppData\\Local\\Energia15\\packages\\energia\\hardware\\msp432e\\5.19.0\\system/kernel/tirtos/builds/MSP_EXP432E401Y/release/gcc/.." "-IC:\\Users\\user1\\AppData\\Local\\Energia15\\packages\\energia\\hardware\\msp432e\\5.19.0\\system/kernel/tirtos/packages/gnu/targets/arm/libs/install-native/arm-none-eabi/include/newlib-nano" "-IC:\\Users\\user1\\AppData\\Local\\Energia15\\packages\\energia\\hardware\\msp432e\\5.19.0\\system/kernel/tirtos/packages/gnu/targets/arm/libs/install-native/arm-none-eabi/include" "-IC:\\Users\\user1\\AppData\\Local\\Energia15\\packages\\energia\\tools\\arm-none-eabi-gcc\\6.3.1-20170620/bin//arm-none-eabi/include" "-IC:\\Users\\user1\\AppData\\Local\\Energia15\\packages\\energia\\hardware\\msp432e\\5.19.0\\system/source/ti/devices/msp432e4/driverlib" "-IC:\\Users\\user1\\AppData\\Local\\Energia15\\packages\\energia\\hardware\\msp432e\\5.19.0\\system/source/ti/devices/msp432e4/inc" "-IC:\\Users\\user1\\AppData\\Local\\Energia15\\packages\\energia\\hardware\\msp432e\\5.19.0\\system/source/ti/devices/msp432e4/" "-IC:\\Users\\user1\\AppData\\Local\\Energia15\\packages\\energia\\hardware\\msp432e\\5.19.0\\system/source/third_party/CMSIS/Include" "-IC:\\Users\\user1\\AppData\\Local\\Energia15\\packages\\energia\\hardware\\msp432e\\5.19.0\\cores\\msp432e" "-IC:\\Users\\user1\\AppData\\Local\\Energia15\\packages\\energia\\hardware\\msp432e\\5.19.0\\variants\\MSP_EXP432E401Y" "C:\\Users\\user1\\AppData\\Local\\Temp\\arduino_build_575049\\sketch\\main.cpp" -o nul Generating function prototypes... "C:\\Users\\user1\\AppData\\Local\\Energia15\\packages\\energia\\tools\\arm-none-eabi-gcc\\6.3.1-20170620/bin/arm-none-eabi-g++" -mcpu=cortex-m4 -mthumb -mfloat-abi=hard -mfpu=fpv4-sp-d16 -mabi=aapcs -g -Dxdc_target_types__=gnu/targets/arm/std.h -Dxdc_target_name__=M4F "-Dxdc_cfg__xheader__=\"configPkg/package/cfg/energia_pm4fg.h\"" -DBOARD_MSP_EXP432E401Y -Dxdc__nolocalstring=1 -D__MSP432E401Y__ -c -g -O0 -w -ffunction-sections -fdata-sections -fno-threadsafe-statics -fno-rtti -fno-exceptions -std=c++98 -w -x c++ -E -CC -mcpu=cortex-m4 -mthumb -DF_CPU=120000000L -DARDUINO=10811 -DENERGIA=10811 -DENERGIA_MSP_EXP432E401Y -DENERGIA_ARCH_MSP432E "-IC:\\Users\\user1\\AppData\\Local\\Energia15\\packages\\energia\\hardware\\msp432e\\5.19.0\\system/source/ti/devices/msp432e4/driverlib" "-IC:\\Users\\user1\\AppData\\Local\\Energia15\\packages\\energia\\hardware\\msp432e\\5.19.0\\system/source/ti/devices/msp432e4/inc" "-IC:\\Users\\user1\\AppData\\Local\\Energia15\\packages\\energia\\hardware\\msp432e\\5.19.0\\system/source/ti/devices/msp432e4/" "-IC:\\Users\\user1\\AppData\\Local\\Energia15\\packages\\energia\\hardware\\msp432e\\5.19.0\\system/source/third_party/CMSIS/Include" "-IC:\\Users\\user1\\AppData\\Local\\Energia15\\packages\\energia\\hardware\\msp432e\\5.19.0\\system/energia" "-IC:\\Users\\user1\\AppData\\Local\\Energia15\\packages\\energia\\hardware\\msp432e\\5.19.0\\cores\\msp432e/ti/runtime/wiring/" "-IC:\\Users\\user1\\AppData\\Local\\Energia15\\packages\\energia\\hardware\\msp432e\\5.19.0\\cores\\msp432e/ti/runtime/wiring/msp432e" "-IC:\\Users\\user1\\AppData\\Local\\Energia15\\packages\\energia\\hardware\\msp432e\\5.19.0\\system/source/ti/net/bsd" "-IC:\\Users\\user1\\AppData\\Local\\Energia15\\packages\\energia\\hardware\\msp432e\\5.19.0\\system/source" "-IC:\\Users\\user1\\AppData\\Local\\Energia15\\packages\\energia\\hardware\\msp432e\\5.19.0\\system/source/third_party/CMSIS/Include" "-IC:\\Users\\user1\\AppData\\Local\\Energia15\\packages\\energia\\hardware\\msp432e\\5.19.0\\system/source/ti/posix/gcc" "-IC:\\Users\\user1\\AppData\\Local\\Energia15\\packages\\energia\\hardware\\msp432e\\5.19.0\\system/kernel/tirtos/packages/gnu/targets/arm/libs/install-native/arm-none-eabi/include/newlib-nano" "-IC:\\Users\\user1\\AppData\\Local\\Energia15\\packages\\energia\\hardware\\msp432e\\5.19.0\\system/kernel/tirtos/packages/gnu/targets/arm/libs/install-native/arm-none-eabi/include" "-IC:\\Users\\user1\\AppData\\Local\\Energia15\\packages\\energia\\hardware\\msp432e\\5.19.0\\system/source" "-IC:\\Users\\user1\\AppData\\Local\\Energia15\\packages\\energia\\hardware\\msp432e\\5.19.0\\system/kernel/tirtos/packages" "-IC:\\Users\\user1\\AppData\\Local\\Energia15\\packages\\energia\\hardware\\msp432e\\5.19.0\\system/kernel/tirtos/builds/MSP_EXP432E401Y/release/gcc/.." "-IC:\\Users\\user1\\AppData\\Local\\Energia15\\packages\\energia\\hardware\\msp432e\\5.19.0\\system/kernel/tirtos/packages/gnu/targets/arm/libs/install-native/arm-none-eabi/include/newlib-nano" "-IC:\\Users\\user1\\AppData\\Local\\Energia15\\packages\\energia\\hardware\\msp432e\\5.19.0\\system/kernel/tirtos/packages/gnu/targets/arm/libs/install-native/arm-none-eabi/include" "-IC:\\Users\\user1\\AppData\\Local\\Energia15\\packages\\energia\\tools\\arm-none-eabi-gcc\\6.3.1-20170620/bin//arm-none-eabi/include" "-IC:\\Users\\user1\\AppData\\Local\\Energia15\\packages\\energia\\hardware\\msp432e\\5.19.0\\system/source/ti/devices/msp432e4/driverlib" "-IC:\\Users\\user1\\AppData\\Local\\Energia15\\packages\\energia\\hardware\\msp432e\\5.19.0\\system/source/ti/devices/msp432e4/inc" "-IC:\\Users\\user1\\AppData\\Local\\Energia15\\packages\\energia\\hardware\\msp432e\\5.19.0\\system/source/ti/devices/msp432e4/" "-IC:\\Users\\user1\\AppData\\Local\\Energia15\\packages\\energia\\hardware\\msp432e\\5.19.0\\system/source/third_party/CMSIS/Include" "-IC:\\Users\\user1\\AppData\\Local\\Energia15\\packages\\energia\\hardware\\msp432e\\5.19.0\\cores\\msp432e" "-IC:\\Users\\user1\\AppData\\Local\\Energia15\\packages\\energia\\hardware\\msp432e\\5.19.0\\variants\\MSP_EXP432E401Y" "C:\\Users\\user1\\AppData\\Local\\Temp\\arduino_build_575049\\sketch\\sketch_may09a.ino.cpp" -o "C:\\Users\\user1\\AppData\\Local\\Temp\\arduino_build_575049\\preproc\\ctags_target_for_gcc_minus_e.cpp" "C:\\energia-1.8.10E23\\tools-builder\\ctags\\5.8-arduino11/ctags" -u --language-force=c++ -f - --c++-kinds=svpf --fields=KSTtzns --line-directives "C:\\Users\\user1\\AppData\\Local\\Temp\\arduino_build_575049\\preproc\\ctags_target_for_gcc_minus_e.cpp" Compiling sketch... java -jar "C:\\Users\\user1\\AppData\\Local\\Energia15\\packages\\energia\\tools\\ino2cpp\\1.0.3/ino2cpp.jar" -o "C:\\Users\\user1\\AppData\\Local\\Temp\\arduino_build_575049/sketch/" -T "C:\\Users\\user1\\AppData\\Local\\Energia15\\packages\\energia\\tools\\ino2cpp\\1.0.3/templates/Variables.mk.template" -r "C:\\Users\\user1\\AppData\\Local\\Energia15\\packages\\energia\\tools\\ino2cpp\\1.0.3" -n sketch_may09a.ino "C:\\Users\\user1\\Documents\\Energia\\sketch_may09a" "msp432e:MSP_EXP432E401Y\"" "C:\\Users\\user1\\AppData\\Local\\Energia15\\packages\\energia\\tools\\arm-none-eabi-gcc\\6.3.1-20170620/bin/arm-none-eabi-g++" -mcpu=cortex-m4 -mthumb -mfloat-abi=hard -mfpu=fpv4-sp-d16 -mabi=aapcs -g -Dxdc_target_types__=gnu/targets/arm/std.h -Dxdc_target_name__=M4F "-Dxdc_cfg__xheader__=\"configPkg/package/cfg/energia_pm4fg.h\"" -DBOARD_MSP_EXP432E401Y -Dxdc__nolocalstring=1 -D__MSP432E401Y__ -c -g -O0 -Wall -Wextra -ffunction-sections -fdata-sections -fno-threadsafe-statics -fno-rtti -fno-exceptions -std=c++98 -MMD -mcpu=cortex-m4 -mthumb -DF_CPU=120000000L -DARDUINO=10811 -DENERGIA=10811 -DENERGIA_MSP_EXP432E401Y -DENERGIA_ARCH_MSP432E "-IC:\\Users\\user1\\AppData\\Local\\Energia15\\packages\\energia\\hardware\\msp432e\\5.19.0\\system/source/ti/devices/msp432e4/driverlib" "-IC:\\Users\\user1\\AppData\\Local\\Energia15\\packages\\energia\\hardware\\msp432e\\5.19.0\\system/source/ti/devices/msp432e4/inc" "-IC:\\Users\\user1\\AppData\\Local\\Energia15\\packages\\energia\\hardware\\msp432e\\5.19.0\\system/source/ti/devices/msp432e4/" "-IC:\\Users\\user1\\AppData\\Local\\Energia15\\packages\\energia\\hardware\\msp432e\\5.19.0\\system/source/third_party/CMSIS/Include" "-IC:\\Users\\user1\\AppData\\Local\\Energia15\\packages\\energia\\hardware\\msp432e\\5.19.0\\system/energia" "-IC:\\Users\\user1\\AppData\\Local\\Energia15\\packages\\energia\\hardware\\msp432e\\5.19.0\\cores\\msp432e/ti/runtime/wiring/" "-IC:\\Users\\user1\\AppData\\Local\\Energia15\\packages\\energia\\hardware\\msp432e\\5.19.0\\cores\\msp432e/ti/runtime/wiring/msp432e" "-IC:\\Users\\user1\\AppData\\Local\\Energia15\\packages\\energia\\hardware\\msp432e\\5.19.0\\system/source/ti/net/bsd" "-IC:\\Users\\user1\\AppData\\Local\\Energia15\\packages\\energia\\hardware\\msp432e\\5.19.0\\system/source" "-IC:\\Users\\user1\\AppData\\Local\\Energia15\\packages\\energia\\hardware\\msp432e\\5.19.0\\system/source/third_party/CMSIS/Include" "-IC:\\Users\\user1\\AppData\\Local\\Energia15\\packages\\energia\\hardware\\msp432e\\5.19.0\\system/source/ti/posix/gcc" "-IC:\\Users\\user1\\AppData\\Local\\Energia15\\packages\\energia\\hardware\\msp432e\\5.19.0\\system/kernel/tirtos/packages/gnu/targets/arm/libs/install-native/arm-none-eabi/include/newlib-nano" "-IC:\\Users\\user1\\AppData\\Local\\Energia15\\packages\\energia\\hardware\\msp432e\\5.19.0\\system/kernel/tirtos/packages/gnu/targets/arm/libs/install-native/arm-none-eabi/include" "-IC:\\Users\\user1\\AppData\\Local\\Energia15\\packages\\energia\\hardware\\msp432e\\5.19.0\\system/source" "-IC:\\Users\\user1\\AppData\\Local\\Energia15\\packages\\energia\\hardware\\msp432e\\5.19.0\\system/kernel/tirtos/packages" "-IC:\\Users\\user1\\AppData\\Local\\Energia15\\packages\\energia\\hardware\\msp432e\\5.19.0\\system/kernel/tirtos/builds/MSP_EXP432E401Y/release/gcc/.." "-IC:\\Users\\user1\\AppData\\Local\\Energia15\\packages\\energia\\hardware\\msp432e\\5.19.0\\system/kernel/tirtos/packages/gnu/targets/arm/libs/install-native/arm-none-eabi/include/newlib-nano" "-IC:\\Users\\user1\\AppData\\Local\\Energia15\\packages\\energia\\hardware\\msp432e\\5.19.0\\system/kernel/tirtos/packages/gnu/targets/arm/libs/install-native/arm-none-eabi/include" "-IC:\\Users\\user1\\AppData\\Local\\Energia15\\packages\\energia\\tools\\arm-none-eabi-gcc\\6.3.1-20170620/bin//arm-none-eabi/include" "-IC:\\Users\\user1\\AppData\\Local\\Energia15\\packages\\energia\\hardware\\msp432e\\5.19.0\\system/source/ti/devices/msp432e4/driverlib" "-IC:\\Users\\user1\\AppData\\Local\\Energia15\\packages\\energia\\hardware\\msp432e\\5.19.0\\system/source/ti/devices/msp432e4/inc" "-IC:\\Users\\user1\\AppData\\Local\\Energia15\\packages\\energia\\hardware\\msp432e\\5.19.0\\system/source/ti/devices/msp432e4/" "-IC:\\Users\\user1\\AppData\\Local\\Energia15\\packages\\energia\\hardware\\msp432e\\5.19.0\\system/source/third_party/CMSIS/Include" "-IC:\\Users\\user1\\AppData\\Local\\Energia15\\packages\\energia\\hardware\\msp432e\\5.19.0\\cores\\msp432e" "-IC:\\Users\\user1\\AppData\\Local\\Energia15\\packages\\energia\\hardware\\msp432e\\5.19.0\\variants\\MSP_EXP432E401Y" "C:\\Users\\user1\\AppData\\Local\\Temp\\arduino_build_575049\\sketch\\sketch_may09a.ino.cpp" -o "C:\\Users\\user1\\AppData\\Local\\Temp\\arduino_build_575049\\sketch\\sketch_may09a.ino.cpp.o" "C:\\Users\\user1\\AppData\\Local\\Energia15\\packages\\energia\\tools\\arm-none-eabi-gcc\\6.3.1-20170620/bin/arm-none-eabi-g++" -mcpu=cortex-m4 -mthumb -mfloat-abi=hard -mfpu=fpv4-sp-d16 -mabi=aapcs -g -Dxdc_target_types__=gnu/targets/arm/std.h -Dxdc_target_name__=M4F "-Dxdc_cfg__xheader__=\"configPkg/package/cfg/energia_pm4fg.h\"" -DBOARD_MSP_EXP432E401Y -Dxdc__nolocalstring=1 -D__MSP432E401Y__ -c -g -O0 -Wall -Wextra -ffunction-sections -fdata-sections -fno-threadsafe-statics -fno-rtti -fno-exceptions -std=c++98 -MMD -mcpu=cortex-m4 -mthumb -DF_CPU=120000000L -DARDUINO=10811 -DENERGIA=10811 -DENERGIA_MSP_EXP432E401Y -DENERGIA_ARCH_MSP432E "-IC:\\Users\\user1\\AppData\\Local\\Energia15\\packages\\energia\\hardware\\msp432e\\5.19.0\\system/source/ti/devices/msp432e4/driverlib" "-IC:\\Users\\user1\\AppData\\Local\\Energia15\\packages\\energia\\hardware\\msp432e\\5.19.0\\system/source/ti/devices/msp432e4/inc" "-IC:\\Users\\user1\\AppData\\Local\\Energia15\\packages\\energia\\hardware\\msp432e\\5.19.0\\system/source/ti/devices/msp432e4/" "-IC:\\Users\\user1\\AppData\\Local\\Energia15\\packages\\energia\\hardware\\msp432e\\5.19.0\\system/source/third_party/CMSIS/Include" "-IC:\\Users\\user1\\AppData\\Local\\Energia15\\packages\\energia\\hardware\\msp432e\\5.19.0\\system/energia" "-IC:\\Users\\user1\\AppData\\Local\\Energia15\\packages\\energia\\hardware\\msp432e\\5.19.0\\cores\\msp432e/ti/runtime/wiring/" "-IC:\\Users\\user1\\AppData\\Local\\Energia15\\packages\\energia\\hardware\\msp432e\\5.19.0\\cores\\msp432e/ti/runtime/wiring/msp432e" "-IC:\\Users\\user1\\AppData\\Local\\Energia15\\packages\\energia\\hardware\\msp432e\\5.19.0\\system/source/ti/net/bsd" "-IC:\\Users\\user1\\AppData\\Local\\Energia15\\packages\\energia\\hardware\\msp432e\\5.19.0\\system/source" "-IC:\\Users\\user1\\AppData\\Local\\Energia15\\packages\\energia\\hardware\\msp432e\\5.19.0\\system/source/third_party/CMSIS/Include" "-IC:\\Users\\user1\\AppData\\Local\\Energia15\\packages\\energia\\hardware\\msp432e\\5.19.0\\system/source/ti/posix/gcc" "-IC:\\Users\\user1\\AppData\\Local\\Energia15\\packages\\energia\\hardware\\msp432e\\5.19.0\\system/kernel/tirtos/packages/gnu/targets/arm/libs/install-native/arm-none-eabi/include/newlib-nano" "-IC:\\Users\\user1\\AppData\\Local\\Energia15\\packages\\energia\\hardware\\msp432e\\5.19.0\\system/kernel/tirtos/packages/gnu/targets/arm/libs/install-native/arm-none-eabi/include" "-IC:\\Users\\user1\\AppData\\Local\\Energia15\\packages\\energia\\hardware\\msp432e\\5.19.0\\system/source" "-IC:\\Users\\user1\\AppData\\Local\\Energia15\\packages\\energia\\hardware\\msp432e\\5.19.0\\system/kernel/tirtos/packages" "-IC:\\Users\\user1\\AppData\\Local\\Energia15\\packages\\energia\\hardware\\msp432e\\5.19.0\\system/kernel/tirtos/builds/MSP_EXP432E401Y/release/gcc/.." "-IC:\\Users\\user1\\AppData\\Local\\Energia15\\packages\\energia\\hardware\\msp432e\\5.19.0\\system/kernel/tirtos/packages/gnu/targets/arm/libs/install-native/arm-none-eabi/include/newlib-nano" "-IC:\\Users\\user1\\AppData\\Local\\Energia15\\packages\\energia\\hardware\\msp432e\\5.19.0\\system/kernel/tirtos/packages/gnu/targets/arm/libs/install-native/arm-none-eabi/include" "-IC:\\Users\\user1\\AppData\\Local\\Energia15\\packages\\energia\\tools\\arm-none-eabi-gcc\\6.3.1-20170620/bin//arm-none-eabi/include" "-IC:\\Users\\user1\\AppData\\Local\\Energia15\\packages\\energia\\hardware\\msp432e\\5.19.0\\system/source/ti/devices/msp432e4/driverlib" "-IC:\\Users\\user1\\AppData\\Local\\Energia15\\packages\\energia\\hardware\\msp432e\\5.19.0\\system/source/ti/devices/msp432e4/inc" "-IC:\\Users\\user1\\AppData\\Local\\Energia15\\packages\\energia\\hardware\\msp432e\\5.19.0\\system/source/ti/devices/msp432e4/" "-IC:\\Users\\user1\\AppData\\Local\\Energia15\\packages\\energia\\hardware\\msp432e\\5.19.0\\system/source/third_party/CMSIS/Include" "-IC:\\Users\\user1\\AppData\\Local\\Energia15\\packages\\energia\\hardware\\msp432e\\5.19.0\\cores\\msp432e" "-IC:\\Users\\user1\\AppData\\Local\\Energia15\\packages\\energia\\hardware\\msp432e\\5.19.0\\variants\\MSP_EXP432E401Y" "C:\\Users\\user1\\AppData\\Local\\Temp\\arduino_build_575049\\sketch\\main.cpp" -o "C:\\Users\\user1\\AppData\\Local\\Temp\\arduino_build_575049\\sketch\\main.cpp.o" In file included from C:\Users\user1\AppData\Local\Energia15\packages\energia\hardware\msp432e\5.19.0\cores\msp432e/ti/runtime/wiring/Energia.h:165:0, from C:\Users\user1\AppData\Local\Energia15\packages\energia\hardware\msp432e\5.19.0\cores\msp432e/ti/runtime/wiring/Arduino.h:3, from C:\Users\user1\Documents\Energia\sketch_may09a\sketch_may09a.ino:1: C:\Users\user1\AppData\Local\Energia15\packages\energia\hardware\msp432e\5.19.0\cores\msp432e/ti/runtime/wiring/WCharacter.h: In function 'boolean isAscii(int)': C:\Users\user1\AppData\Local\Energia15\packages\energia\hardware\msp432e\5.19.0\cores\msp432e/ti/runtime/wiring/WCharacter.h:63:1: warning: no return statement in function returning non-void [-Wreturn-type] } ^ C:\Users\user1\AppData\Local\Energia15\packages\energia\hardware\msp432e\5.19.0\cores\msp432e/ti/runtime/wiring/WCharacter.h:60:28: warning: unused parameter 'c' [-Wunused-parameter] inline boolean isAscii(int c) ^ C:\Users\user1\AppData\Local\Energia15\packages\energia\hardware\msp432e\5.19.0\cores\msp432e/ti/runtime/wiring/WCharacter.h: In function 'int toAscii(int)': C:\Users\user1\AppData\Local\Energia15\packages\energia\hardware\msp432e\5.19.0\cores\msp432e/ti/runtime/wiring/WCharacter.h:134:1: warning: no return statement in function returning non-void [-Wreturn-type] } ^ C:\Users\user1\AppData\Local\Energia15\packages\energia\hardware\msp432e\5.19.0\cores\msp432e/ti/runtime/wiring/WCharacter.h:131:24: warning: unused parameter 'c' [-Wunused-parameter] inline int toAscii(int c) ^ In file included from C:\Users\user1\AppData\Local\Energia15\packages\energia\hardware\msp432e\5.19.0\cores\msp432e/ti/runtime/wiring/Energia.h:165:0, from C:\Users\user1\AppData\Local\Temp\arduino_build_575049\sketch\main.cpp:17: C:\Users\user1\AppData\Local\Energia15\packages\energia\hardware\msp432e\5.19.0\cores\msp432e/ti/runtime/wiring/WCharacter.h: In function 'boolean isAscii(int)': C:\Users\user1\AppData\Local\Energia15\packages\energia\hardware\msp432e\5.19.0\cores\msp432e/ti/runtime/wiring/WCharacter.h:63:1: warning: no return statement in function returning non-void [-Wreturn-type] } ^ C:\Users\user1\AppData\Local\Energia15\packages\energia\hardware\msp432e\5.19.0\cores\msp432e/ti/runtime/wiring/WCharacter.h:60:28: warning: unused parameter 'c' [-Wunused-parameter] inline boolean isAscii(int c) ^ C:\Users\user1\AppData\Local\Energia15\packages\energia\hardware\msp432e\5.19.0\cores\msp432e/ti/runtime/wiring/WCharacter.h: In function 'int toAscii(int)': C:\Users\user1\AppData\Local\Energia15\packages\energia\hardware\msp432e\5.19.0\cores\msp432e/ti/runtime/wiring/WCharacter.h:134:1: warning: no return statement in function returning non-void [-Wreturn-type] } ^ C:\Users\user1\AppData\Local\Energia15\packages\energia\hardware\msp432e\5.19.0\cores\msp432e/ti/runtime/wiring/WCharacter.h:131:24: warning: unused parameter 'c' [-Wunused-parameter] inline int toAscii(int c) ^ Compiling libraries... Compiling core... Using previously compiled file: C:\Users\user1\AppData\Local\Temp\arduino_build_575049\core\package\package_ti.runtime.wiring.msp432e.variants.MSP_EXP432E401Y.c.o Using previously compiled file: C:\Users\user1\AppData\Local\Temp\arduino_build_575049\core\Board_init.c.o Using previously compiled file: C:\Users\user1\AppData\Local\Temp\arduino_build_575049\core\pins.c.o Using previously compiled file: C:\Users\user1\AppData\Local\Temp\arduino_build_575049\core\SpiObjects.cpp.o Using previously compiled file: C:\Users\user1\AppData\Local\Temp\arduino_build_575049\core\WireObjects.cpp.o Using previously compiled file: C:\Users\user1\AppData\Local\Temp\arduino_build_575049\core\SerialObjects.cpp.o Using precompiled core: C:\Users\user1\AppData\Local\Temp\arduino_cache_983109\core\core_energia_msp432e_MSP-EXP432E401Y_fbcb930ca74c664a9e12b1eb7ba86ff2.a Linking everything together... "C:\\Users\\user1\\AppData\\Local\\Energia15\\packages\\energia\\tools\\arm-none-eabi-gcc\\6.3.1-20170620/bin/arm-none-eabi-g++" -mcpu=cortex-m4 -mthumb -nostartfiles -O0 -Wl,--gc-sections -specs=nano.specs -specs=rdimon.specs -specs=nosys.specs -Wl,-u,main "-Wl,-Map,C:\\Users\\user1\\AppData\\Local\\Temp\\arduino_build_575049/sketch_may09a.ino.map" -mcpu=cortex-m4 -mthumb -mfloat-abi=hard -mfpu=fpv4-sp-d16 -mabi=aapcs -o "C:\\Users\\user1\\AppData\\Local\\Temp\\arduino_build_575049/sketch_may09a.ino.elf" "C:\\Users\\user1\\AppData\\Local\\Temp\\arduino_build_575049\\sketch\\main.cpp.o" "C:\\Users\\user1\\AppData\\Local\\Temp\\arduino_build_575049\\sketch\\sketch_may09a.ino.cpp.o" "C:\\Users\\user1\\AppData\\Local\\Temp\\arduino_build_575049\\core\\Board_init.c.o" "C:\\Users\\user1\\AppData\\Local\\Temp\\arduino_build_575049\\core\\package\\package_ti.runtime.wiring.msp432e.variants.MSP_EXP432E401Y.c.o" "C:\\Users\\user1\\AppData\\Local\\Temp\\arduino_build_575049\\core\\pins.c.o" "C:\\Users\\user1\\AppData\\Local\\Temp\\arduino_build_575049\\core\\SerialObjects.cpp.o" "C:\\Users\\user1\\AppData\\Local\\Temp\\arduino_build_575049\\core\\SpiObjects.cpp.o" "C:\\Users\\user1\\AppData\\Local\\Temp\\arduino_build_575049\\core\\WireObjects.cpp.o" "-LC:\\Users\\user1\\AppData\\Local\\Energia15\\packages\\energia\\hardware\\msp432e\\5.19.0\\system/kernel/tirtos/packages/gnu/targets/arm/libs/install-native/arm-none-eabi/lib/thumb/v7e-m/fpv4-sp/hard" "-LC:\\Users\\user1\\AppData\\Local\\Temp\\arduino_build_575049" "-LC:\\Users\\user1\\AppData\\Local\\Energia15\\packages\\energia\\hardware\\msp432e\\5.19.0\\cores\\msp432e" "-LC:\\Users\\user1\\AppData\\Local\\Energia15\\packages\\energia\\hardware\\msp432e\\5.19.0\\system/energia" "-LC:\\Users\\user1\\AppData\\Local\\Energia15\\packages\\energia\\hardware\\msp432e\\5.19.0\\system/kernel" "-LC:\\Users\\user1\\AppData\\Local\\Energia15\\packages\\energia\\hardware\\msp432e\\5.19.0\\system/source" "-LC:\\Users\\user1\\AppData\\Local\\Energia15\\packages\\energia\\hardware\\msp432e\\5.19.0\\system/kernel/tirtos/builds/MSP_EXP432E401Y/energia/" "-LC:\\Users\\user1\\AppData\\Local\\Energia15\\packages\\energia\\hardware\\msp432e\\5.19.0\\system/kernel/tirtos/packages" "-LC:\\Users\\user1\\AppData\\Local\\Energia15\\packages\\energia\\hardware\\msp432e\\5.19.0\\cores\\msp432e/ti/runtime/wiring/msp432e" "-LC:\\Users\\user1\\AppData\\Local\\Energia15\\packages\\energia\\hardware\\msp432e\\5.19.0\\cores\\msp432e/ti/runtime/wiring/msp432e/variants/MSP_EXP432E401Y" -Wl,--check-sections -Wl,--gc-sections "C:\\Users\\user1\\AppData\\Local\\Temp\\arduino_build_575049/..\\arduino_cache_983109\\core\\core_energia_msp432e_MSP-EXP432E401Y_fbcb930ca74c664a9e12b1eb7ba86ff2.a" "-Wl,-TC:\\Users\\user1\\AppData\\Local\\Energia15\\packages\\energia\\hardware\\msp432e\\5.19.0\\system/energia/linker.cmd" "C:\\Users\\user1\\AppData\\Local\\Energia15\\packages\\energia\\hardware\\msp432e\\5.19.0\\system/source/ti/devices/msp432e4/driverlib/lib/gcc/m4f/msp432e4_driverlib.a" -static -lstdc++ -lgcc -lc -lm -lnosys cmd /c copy "C:\\Users\\user1\\AppData\\Local\\Energia15\\packages\\energia\\hardware\\msp432e\\5.19.0\\system/energia/energia_pm4fg.rov.xs" "C:\\Users\\user1\\AppData\\Local\\Temp\\arduino_build_575049" The syntax of the command is incorrect. exit status 1 Error compiling for board LaunchPad w/ msp432e EMT (120MHz).
  1. Load more activity
×
×
  • Create New...