Jump to content


How to program a CC1310F64RHBT in Energia

CC1310 programming launchpad energia jtag

  • Please log in to reply
20 replies to this topic

#21 cameron



  • Members
  • PipPip
  • 14 posts

Posted 11 February 2017 - 08:16 AM

@jpnorair @spirilis

Hello! I am back quite a few months later with a finished 4 layer PCB which uses the CC1310F128RHBT. I currently using the programmer on the MSP432 LP to flash code to the chip. Uploading code from Energia while selecting the CC1310 LP board works just fine, but the code never executes properly. I have narrowed this down to an issue within the CC1310 LP board files. If I try to blink an LED on the board with some simple code, it uploads fine, but it doesn't blink the LED. In fact, using any kind of simple digitalWrite commands does not work. I think this is because the CC1310 LP has 48 pins while the CC1310F128RHBT has only 32. I need to be able to select the correct pin number and digitalWrite to it for any basic needs. Would either of you know where I could find the board files for my chip?


Thanks so much,


Also tagged with one or more of these keywords: CC1310, programming, launchpad, energia, jtag

0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users